default_mobilelogo
StrataRise PS2 14mm Fixed Height Supports
For Pavers, Slabs and Tiles
PS2-14 Paver Support
3/64" (1mm) and 1/8" (3mm) thick Adjustment Spacer Rings

Moulded polypropylene Paver Support 9/16" (14mm) high with water channels in base and 9/16" (14mm) x 5/32" (4mm) wide ribs to allow perfect spacing of pavers or tiles. This product is weather-proof and suited for most types of pavers and slabs laid on grit or hard surfaces.

The base of the paver support has a smooth profile which minimises the possibility of damage when used on top of bituminous or other membranes. The base can be easily split into quadrants or halves for perimeters and corners.

3mm thick spacer rings, again easily divided into halves or quadrants, are available to compensate for minor variations in the levels of the laying surface. The spacers can be stacked for larger adjustments.

The PS2 paver support is also designed to be stackable so, if larger adjustments are required than can be achieved using multiples of the 3/64" (1mm) or 1/8" (3mm) spacer shim rings, you can simply stack additional base supports together to achieve higher support levels as required.

Recyclable at end of life.

Bulk Box: 360 pieces.

Also sold in boxes of 30 or 60 pieces.

StrataRise Pedestals ... the professional's choice!
Specifications

Diameter: 6" (155mm)
Height: 9/16" (14mm) with 9/16" high x 5/32" wide spacer ribs.

PS2-14 Moulded plastic Paver Support

PS2-14-1 3/64" thickness spacer ring
PS2-14-3 3mm1/8" thickness spacer ring